V 1 DK 32 X 9 | Vibracoustic Aircruise Air Spring for BPW 36 Axle

Air springs are highly durable, precisely engineered and cost-effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, air springs provide superior quality and performance.
As an actuator, air springs provide linear or angular motion. These air springs offer a favorable stroke-to-compressed-height ratio when compared to air cylinders, and can accept a wide variety of actuation media such as air, water, nitrogen or anti-freeze.
As an isolator, air springs are effective in reducing the harmful effects of vibration. They can simultaneously isolate vibration and regulate load height, as well as allow for consistent vibration isolation under varying loads.
Rolstoon Inc. offers a variety of air spring types to meet your actuation or isolation needs. The Single, Double and Triple Convoluted Bellows, Rolling Lobe and Sleeve Types are available in a wide range of sizes, with the End Retainer Style required for your installation.

Do not inflate assembly when it is unrestricted and/or unsecured. Assembly must be properly restricted by and secured to a suspension or other adequate structure. Do not inflate beyond pressures recommended in design literature. Improper use or over inflation may cause assembly to burst causing property damage or severe personal injury.