Bahay » Mga produkto » Air Springs » Convoluted Air Springs » Single Convoluted Air Springs » Yokohama Industrial Air Springs

Yokohama Industrial Air Springs

Yokohama Industrial Air Springs, kasama ang Self Seal at Sealed. Kasama sa Numero ng Produkto ang S-600-5R / S-600-4R / S-600-3R / S-600-2R / S-600-1R / S-550-3R / S-550-2R / S-500-5R / S-500-4R / S-500-3R / S-500R / S-500-3R / S-500 S-450-4R / S-450-3R / S-450-2R / S-450-1R / S-400-5R / S-400-4R / S-400-3R / S-400-2R / S-350-4R / S-350-3R / S-350-3R / S-350-R / S-350-30 S-300-3R / S-300-2R / S-240-4R / S-240-3R / S-240-2R / S-240-1R / S-220-4R / S-220-3R / S-220-2R / S-200-4R / S-200-R / S-200-30R / S-200-4R / S-200-3R S-160-3R / S-160-2R / S-120-3R / M-600-5R / M-600-4R / M-600-3R / M-600-2R / M-550-3R / M-550-2R / M-500-5R / M-500-5R / M-500-5R / M-500-R / M-500R / M-500-5R M-450-5R / M-450-4R / M-450-3R / M-450-2R / M-400-5R / M-400-4R / M-400-3R / M-400-2R / M-350-4R / M-350-3R / M-350-3R / M-350-R / M-350-R / M-350-30R M-300-2R / M-240-4R / M-240-3R / M-240-2R / M-220-4R / M-220-3R / M-220-2R / M-200-4R / M-200-3R / M-200-2R / M-200-2R / M-220-601 M-120-4R / M-120-3R / M-120-2R / M-100-4R / M-100-3R / M-100-2R / M-90-3R / M-60-4R / M-60-3R / M-60-2R / M-50-3R / M-50-3R / M-50-2 / M-50 SC-600-4R / SC-600-3R / SC-600-2R / SC-600-1R / SC-550-3R / SC-550-2R / SC-500-5R / SC-500-4R / SC-500-3R / SC-500-2R / SC-500-2R / SC-450-504 SC-450-2R / SC-450-1R / SC-400-5R / SC-400-4R / SC-400-3R / SC-400-2R / SC-350-4R / SC-350-3R / SC-350-2R / SC-350-1R / SCR-300-40 SC-240-4R / SC-240-3R / SC-240-2R / SC-240-1R / SC-220-4R / SC-220-3R / SC-220-2R / SC-200-4R / SC-200-3R / SC-200-2R / SC-200-2R / SC-220-601 SC-120-3R at iba pa.

Brand:
Yokohama

SKU:
Availability:

Dami:



Magtanong Idagdag sa Basket

Yokohama Air Spring Self Seal Air Spring Sealed Air Spring Rubber Air Spring Airbag

Mga tampok

Ang uri ng corrugated tube ay may mas kaunting pagpapapangit ng goma film sa panahon ng operasyon (pagpapalawak at pag-urong) , at maaaring makamit ang mahusay na tibay.
Dahil walang mga sliding parts, hindi na kailangang mag-refuel at madali ang maintenance.
Kung ikukumpara sa iba pang mga bukal, ang taas ng pag-install ay maaaring kontrolin sa loob ng mas malaking hanay ng paglalakbay.
Dahil ang hangin ay ginagamit bilang isang nababanat na materyal, maaari itong madaling makatiis ng malalaking karga. Ang flexibility ng air spring ay hindi taglay ng iba pang nababanat na materyales.
Sa pamamagitan ng pagbabago ng panloob na presyon, ang puwersa ng tagsibol ay maaaring lubos na mabago, kaya ang saklaw ng paggamit ay lubos na lalawak.
Kung ang mga balbula sa pagsasaayos ng taas ay ginagamit nang sabay-sabay, ang isang tiyak na taas ay maaaring mapanatili para sa mga pagbabago sa pagkarga sa lahat ng oras.
Sa pamamagitan ng paggamit ng mga auxiliary chamber at throttle valve sa kumbinasyon, ang mahusay na epekto ng pamamasa ay maaaring makamit. Bukod pa rito, maaaring mabawasan ang resonance amplitude.
Simpleng istraktura, madaling i-install at i-disassemble.

Mga aplikasyon

Suporta para sa malalaking washing machine at pang-industriyang dehydrator
Ang epekto ng anti vibration ay makabuluhan at maaaring gawing simple ang istraktura ng frame.
2-1. Nililimitahan ang aparato para sa paghawak ng kagamitan
2-2. Roller lift para sa brake tester
2-3. Buffer device para sa mga elevator
2-4. Tensioning device para sa belt conveyor
2-5. Elevator para sa drum conveyor
2-6. Valve drive para sa daluyan ng tubig
2-7. Equalizer para sa vibration table
2-8. Stamping mold buffer device
2-9. Pressure application para sa paggawa ng papel na mga roller ng makinarya

Ang ganitong uri ng Air Spring ay ginamit, lalo na ang 'Shinkansen bullet train'. Bilang karagdagan, ang mga ito ay ginamit para sa pag-mount ng mga sasakyan, pang-industriya na makinarya, at iba pang kagamitan sa air vibration at paggamit ng shock isolation.

Ang Yokohama Rubber Air Spring ay binuo ng Yokohama Rubber Company noong 1955, na unang pinagtibay ng Japan Railway Administration at mga pabrika ng sasakyan. Dahil sa superyor na shock resistance at tibay nito, malawak itong kinikilala ng mga customer at malawakang ginagamit bilang pang-industriyang mekanikal na bahagi mula noong 1960-1961.

Mga klasipikasyon

Pagtatalaga	Mga aplikasyon
Bellows model CR series	Pangkalahatang pang-industriya na paggamit: para sa pag-buffer ng amag, pressure, tension, balancer, dynamic na aksyon, anti vibration support. Ang temperatura ng operating environment ay nasa loob ng 60 ℃.

Teknikal na Data

Self Seal Air Springs

Yokohama No.	Taas H(mm)			Karaniwang Max. Stroke (mm)	Maximum Outer Diameter Habang Compression Φ D (mm)	Tinatayang halaga sa panloob na presyon na 0.49 MPa sa karaniwang taas					Max. Nagagamit na Panloob na Presyon (MPa)	Pagsabog ng Panloob na Presyon (MPa)	Katangian ng Ikiling
Yokohama No.	Karaniwang Taas	Max. taas	Min. taas	Karaniwang Max. Stroke (mm)	Maximum Outer Diameter Habang Compression Φ D (mm)	Epektibong Lugar (cm²)	Panloob na Dami (L)	Load (kN)	Rate ng Spring (N/mm)	Natural na Dalas (Hz)	Max. Nagagamit na Panloob na Presyon (MPa)	Pagsabog ng Panloob na Presyon (MPa)	Katangian ng Ikiling
S-730-6	375	585	207	±140	800	4185	160.00	205.00	1050	1.1	0.49	2.5～3.5	○
S-730-5	310	485	170	±115	800	4185	130.00	205.00	1290	1.3	0.49	2.5～3.5	○
S-730-4	245	385	133	±94	800	4185	103.00	205.00	1620	1.4	0.49	2.5～3.5	○
S-730-3	180	285	96	±70	800	4185	75.00	205.00	2220	1.6	0.49	2.5～3.5	○
S-730-2	115	185	62	±45	800	4185	48.00	205.00	3450	2	0.49	2.5～3.5	○
S-730-1	90	125	55	±30	820	4185	35.40	205.00	4950	2.4	0.49	2.5～3.5	○
S-600-5	276	456	156	±113	660	2830	76.60	138.30	1010	1.3	0.69	3.9～4.9	○
S-600-4	218	363	123	±90	660	2830	59.90	138.30	1285	1.5	0.69	3.9～4.9	○
S-600-3	160	270	90	±68	660	2830	43.20	138.30	1765	1.8	0.69	3.9～4.9	○
S-600-2	102	172	57	±45	660	2830	26.30	138.30	2873	2.3	0.69	3.9～4.9	○
S-600-1	72	122	40	±30	700	2830	19.00	138.30	4197	2.8	0.59	3.9～4.9	○
S-550-3	160	270	90	±68	610	2830	37.00	116.70	1481	1.8	0.69	3.9～4.9	○
S-550-2	102	172	50	±45	610	2830	23.00	116.70	2363	2.2	0.69	3.9～4.9	○
S-500-5	276	456	156	±113	560	1965	54.00	96.30	706	1.4	0.69	3.9～4.9	○
S-500-4	218	363	123	±90	560	1965	41.90	96.30	912	1.5	0.69	3.9～4.9	○
S-500-3	160	270	90	±68	560	1965	30.30	96.30	1255	1.8	0.69	3.9～4.9	○
S-500-2	102	172	57	±45	560	1965	18.50	96.30	2020	2.3	0.69	3.9～4.9	○
S-450-5	276	456	156	±113	510	1590	43.60	80.00	588	1.4	0.69	3.9～4.9	○
S-450-4	218	363	123	±90	510	1590	33.80	80.00	755	1.6	0.69	3.9～4.9	○
S-450-3	160	270	90	±68	510	1590	24.30	80.00	1040	1.8	0.69	3.9～4.9	○
S-450-2	102	172	57	±45	510	1590	14.70	80.00	1687	2.3	0.69	3.9～4.9	○
S-450-1	72	117	40	±30	550	1590	11.90	80.00	2295	2.7	0.59	2.9～3.9	○
S-400-5	276	435	156	±113	460	1260	34.50	61.60	481	1.4	0.88	3.9～4.9	○
S-400-4	218	348	123	±90	460	1260	27.10	61.60	608	1.6	0.88	3.9～4.9	○
S-400-3	160	260	90	±68	460	1260	19.50	61.60	834	1.8	0.88	3.9～4.9	○
S-400-2	102	167	57	±45	460	1260	11.90	61.60	1344	2.3	0.88	3.9～4.9	○
S-350-4	218	336	118	±85	410	960	21.00	47.10	471	1.6	0.88	3.9～4.9	○
S-350-3	160	250	85	±65	410	960	15.00	47.10	647	1.8	0.88	3.9～4.9	○
S-350-2	102	160	55	±42	410	960	9.50	47.10	1040	2.3	0.88	3.9～4.9	○
S-350-1	72	117	40	±30	450	960	6.90	47.10	1520	2.8	0.69	2.9～3.9	○
S-300-4	206	326	111	±80	360	710	15.50	34.70	324	1.5	0.88	3.9～4.9	○
S-300-3	152	242	82	±60	360	710	11.20	34.70	490	1.9	0.88	3.9～4.9	○
S-300-2	98	158	53	±40	360	710	7.40	34.70	745	2.3	0.88	3.9～4.9	○
S-300-1	72	117	40	±30	400	710	5.60	34.70	1108	2.8	0.69	2.9～3.9	○
S-240-4	206	316	111	±80	300	450	10.10	22.20	235	1.6	0.88	2.9～3.9	○
S-240-3	152	232	82	±60	300	450	7.30	22.20	324	1.9	0.88	2.9～3.9	○
S-240-2	98	148	53	±40	300	450	4.40	22.20	520	2.4	0.88	2.9～3.9	○
S-240-1	72	110	40	±30	340	450	3.50	22.20	765	2.9	0.69	2.9～3.9	○
S-220-4	206	311	111	±80	280	380	8.60	18.60	206	1.7	0.88	2.9～3.9	△
S-220-3	152	232	82	±60	280	380	6.10	18.60	284	1.9	0.88	2.9～3.9	○
S-220-2	98	148	53	±40	280	380	3.70	18.60	451	2.5	0.88	2.9～3.9	○
S-200-4	206	306	111	±70	260	315	7.20	15.40	177	1.7	0.88	2.9～3.9	△
S-200-3	152	227	82	±53	260	315	5.20	15.40	235	2	0.88	2.9～3.9	○
S-200-2	98	148	53	±35	260	315	3.20	15.40	373	2.5	0.88	2.9～3.9	○
S-160-4	206	306	111	±70	220	200	4.70	9.80	118	1.7	0.88	2.9～3.9	△
S-160-3	152	227	82	±53	220	200	3.40	9.80	157	2	0.88	2.9～3.9	○
S-160-2	98	148	53	±35	220	200	2.10	9.80	255	2.5	0.88	2.9～3.9	○
S-160-1	72	102	40	±25	260	200	1.90	9.80	263	3	0.69	2.9～3.9	○
S-120-4	206	306	111	±70	180	113	3.40	5.20	69	1.8	0.88	2.9～3.9	×
S-120-3	152	227	82	±53	180	113	2.10	5.20	98	2.2	0.88	2.9～3.9	△
S-120-2	98	148	53	±35	180	113	1.25	2.50	157	2.7	0.88	2.9～3.9	○
S-100-4	206	296	121	±60	160	79	1.95	3.90	59	1.9	0.88	2.9～3.9	×
S-100-3	152	222	87	±45	160	79	1.40	3.90	78	2.2	0.88	2.9～3.9	△
S-100-2	98	143	58	±30	160	79	0.85	3.90	118	2.8	0.88	2.9～3.9	○
S-90-3	76	106	46	±30	125	63.5	0.50	3.10	103	2.9	0.88	3.9～4.9	○
S-60-4	103	139	67	±36	90	28.3	0.28	1.40	39	2.7	0.88	3.9～4.9	○
S-60-3	76	103	49	±27	90	28.3	0.20	1.40	59	3.2	0.88	3.9～4.9	○
S-60-2	49	67	31	±18	90	28.3	0.14	1.40	83	3.9	0.88	3.9～4.9	○
S-50-3	61	81	41	±20	75	19.6	0.08	0.96	59	3.9	0.88	3.9～4.9	○
S-50-2	39	52	26	±13	75	19.6	0.04	0.96	108	5.3	0.88	3.9～4.9	○

Sealed Air Springs

Yokohama No.	Taas H(mm)			Karaniwang Max. Stroke (mm)	Maximum Outer Diameter Habang Compression Φ D (mm)	Tinatayang halaga sa panloob na presyon na 0.49 MPa sa karaniwang taas					Max. Nagagamit na Panloob na Presyon (MPa)	Pagsabog ng Panloob na Presyon (MPa)	Katangian ng Ikiling
Yokohama No.	Karaniwang Taas	Max. taas	Min. taas	Karaniwang Max. Stroke (mm)	Maximum Outer Diameter Habang Compression Φ D (mm)	Epektibong Lugar (cm²)	Panloob na Dami (L)	Load (kN)	Rate ng Spring (N/mm)	Natural na Dalas (Hz)	Max. Nagagamit na Panloob na Presyon (MPa)	Pagsabog ng Panloob na Presyon (MPa)	Katangian ng Ikiling
M-600-5	276	456	156	±113	660	2830	76.60	138.30	1010	1.3	0.69	3.9～4.9	○
M-600-4	218	363	123	±90	660	2830	59.90	138.30	1285	1.5	0.69	3.9～4.9	○
M-600-3	160	270	90	±68	660	2830	43.20	138.30	1765	1.8	0.69	3.9～4.9	○
M-600-2	102	172	57	±45	660	2830	26.30	138.30	2873	2.3	0.69	3.9～4.9	○
M-550-3	160	270	90	±68	610	2830	37.00	116.70	1481	1.8	0.69	3.9～4.9	○
M-550-2	102	172	50	±45	610	2830	23.00	116.70	2363	2.2	0.69	3.9～4.9	○
M-500-5	276	456	156	±113	560	1965	54.00	96.30	706	1.4	0.69	3.9～4.9	○
M-500-4	218	363	123	±90	560	1965	41.90	96.30	912	1.5	0.69	3.9～4.9	○
M-500-3	160	270	90	±68	560	1965	30.30	96.30	1255	1.8	0.69	3.9～4.9	○
M-500-2	102	172	57	±45	560	1965	18.50	96.30	2020	2.3	0.69	3.9～4.9	○
M-450-5	276	456	156	±113	510	1590	43.60	80.00	588	1.4	0.69	3.9～4.9	○
M-450-4	218	363	123	±90	510	1590	33.80	80.00	755	1.6	0.69	3.9～4.9	○
M-450-3	160	270	90	±68	510	1590	24.30	80.00	1040	1.8	0.69	3.9～4.9	○
M-450-2	102	172	57	±45	510	1590	14.70	80.00	1687	2.3	0.69	3.9～4.9	○
M-400-5	276	435	156	±113	460	1260	34.50	61.60	481	1.4	0.88	3.9～4.9	○
M-400-4	218	348	123	±90	460	1260	27.10	61.60	608	1.6	0.88	3.9～4.9	○
M-400-3	160	260	90	±68	460	1260	19.50	61.60	834	1.8	0.88	3.9～4.9	○
M-400-2	102	167	57	±45	460	1260	11.90	61.60	1344	2.3	0.88	3.9～4.9	○
M-350-4	218	336	118	±85	410	960	21.00	47.10	471	1.6	0.88	3.9～4.9	○
M-350-3	160	250	85	±65	410	960	15.00	47.10	647	1.8	0.88	3.9～4.9	○
M-350-2	102	160	55	±42	410	960	9.50	47.10	1040	2.3	0.88	3.9～4.9	○
M-300-4	206	326	111	±80	360	710	15.50	34.70	324	1.5	0.88	3.9～4.9	○
M-300-3	152	242	82	±60	360	710	11.20	34.70	490	1.9	0.88	3.9～4.9	○
M-300-2	98	158	53	±40	360	710	7.40	34.70	745	2.3	0.88	3.9～4.9	○
M-240-4	206	316	111	±80	300	450	10.10	22.20	235	1.6	0.88	2.9～3.9	○
M-240-3	152	232	82	±60	300	450	7.30	22.20	324	1.9	0.88	2.9～3.9	○
M-240-2	98	148	53	±40	300	450	4.40	22.20	520	2.4	0.88	2.9～3.9	○
M-220-4	206	311	111	±80	280	380	8.60	18.60	206	1.7	0.88	2.9～3.9	△
M-220-3	152	232	82	±60	280	380	6.10	18.60	284	1.9	0.88	2.9～3.9	○
M-220-2	98	148	53	±40	280	380	3.70	18.60	451	2.5	0.88	2.9～3.9	○
M-200-4	206	306	111	±70	260	315	7.20	15.40	177	1.7	0.88	2.9～3.9	△
M-200-3	152	227	82	±53	260	315	5.20	15.40	235	2	0.88	2.9～3.9	○
M-200-2	98	148	53	±35	260	315	3.20	15.40	373	2.5	0.88	2.9～3.9	○
M-160-4	206	306	111	±70	220	200	4.70	9.80	118	1.7	0.88	2.9～3.9	△
M-160-3	152	227	82	±53	220	200	3.40	9.80	157	2	0.88	2.9～3.9	○
M-160-2	98	148	53	±35	220	200	2.10	9.80	255	2.5	0.88	2.9～3.9	○
M-120-4	206	306	111	±70	180	113	3.40	5.20	69	1.8	0.88	2.9～3.9	×
M-120-3	152	227	82	±53	180	113	2.10	5.20	98	2.2	0.88	2.9～3.9	△
M-120-2	98	148	53	±35	180	113	1.25	2.50	157	2.7	0.88	2.9～3.9	○
M-100-4	206	296	121	±60	160	79	1.95	3.90	59	1.9	0.88	2.9～3.9	×
M-100-3	152	222	87	±45	160	79	1.40	3.90	78	2.2	0.88	2.9～3.9	△
M-100-2	98	143	58	±30	160	79	0.85	3.90	118	2.8	0.88	2.9～3.9	○
M-90-3	76	106	46	±30	125	63.5	0.50	3.10	103	2.9	0.88	3.9～4.9	○
M-60-4	103	139	67	±36	90	28.3	0.28	1.40	39	2.7	0.88	3.9～4.9	○
M-60-3	76	103	49	±27	90	28.3	0.20	1.40	59	3.2	0.88	3.9～4.9	○
M-60-2	49	67	31	±18	90	28.3	0.14	1.40	83	3.9	0.88	3.9～4.9	○
M-50-3	61	81	41	±20	75	19.6	0.08	0.96	59	3.9	0.88	3.9～4.9	○
M-50-2	39	52	26	±13	75	19.6	0.04	0.96	108	5.3	0.88	3.9～4.9	○